Sign In | Join Free | My ecer.co.uk
China DONGGUAN YUYANG INSTRUMENT CO., LTD logo
DONGGUAN YUYANG INSTRUMENT CO., LTD
Verified Supplier

8 Years
Home > Flammability Testing Equipment >

220V Bunched Cables Vertical Testing Equipment , IEC 60332-3 Flammability Test In Textile

Product Categories
DONGGUAN YUYANG INSTRUMENT CO., LTD
Trust Seal
Verified Supplier
Credit Check
Supplier Assessment
Contact Now

220V Bunched Cables Vertical Testing Equipment , IEC 60332-3 Flammability Test In Textile

Brand Name : YUYANG

Model Number : YYF019

Place of Origin : China

MOQ : 1PCS

Price : $15,000 - $20,000

Payment Terms : T/T

Delivery Time : 7-30 Days

Packaging Details : Wooden Box

Gas Burner : 257mm * 4.5mm

Anemometer Accuracy : 0.1m / S

Air Flow : (5000 ± 500) L / Min

Console Size : 600 (W) * 750 (D) * 1,600 (H) mm

Power : AC 220V, 50 / 60hz, 15A

Weight : 1,500kg

Contact Now

IEC 60332-3 Vertical Flammability Tester For Burning Behaviour Of Bunched Cables

Introduction:

Bunched Cable Vertical Flame Spread Tester is a series conforming to IEC 60332-3-10 (Category A~D) standards. The test measures the expansion of vertical flame to the electronically or optically vertical cable or wire using the standard ignition source while supplying a certain amount of air to a chamber of a defined volume.
Additionally, if bunched cable vertical flame spread testers burner is adjusted by 20 degrees angle, it can be measure under IEEE 383(IEEE 1202) standard. Also, if Heat Release Facility is attached, it can measure fire dynamics value as H.R.R (Heat Release Rate), S.P.R (Smoke Production Rate) and so on.

Standards:

* IEC 60332-3-10:2000

* IEC 60332-3-21~25:2000

Features:

* Test chamber has the dimension of 1,000±100(W) *2,000±100(D) * 4,000±100(H) mm.

* The bottom surface of the test chamber is higher than the ground while the rear side is supplemented with insulated material to insulate it from heat.At the lower section of the test chamber, there is a 800±20(W)*400±10(D) sized hole at the 150±10mm position from the front side of the chamber to supply the air.

* There is a 300±30(W)*1,000±100(D) sized exhaust hole at the rear corner of the top section of the test chamber to allow
emission of the smoke during the test.

* A flame trap is installed at the front side of the burner of the vertical flame spread tester to prevent backfire by propane to ensure the utmost safety.

* Unlike the conventional IEC60332-3 equipment, the vertical flame spread tester records all control and test conditions with the computer to add user friendliness.

* If stop the excessive combustion test due to Water Spray device installed for extinguish.

* The program on the requirement on standard and 70,000Btu/h can be program.

* Wide stainless steel ladder dimensions: 500(W) *3, 500(H) mm.

* Standard stainless steel ladder dimensions: 800(W) *3, 500(H).

* Two sets of standard propane burner and venturi mixtures.

* Follow the standard category can program for select a test.
Installation requirements of Vertical Flame Tester for Burning Behaviour of Bunched Cables
Electrical
110V AC 60Hz ,230V AC 50Hz, 5A
Ambient Temperature
Operating 10°C to 35°C
Size
1120 mm (W) *2200 mm (D) * 5070 mm (H)
Weight
500KG
Gas
air and propane

220V Bunched Cables Vertical Testing Equipment , IEC 60332-3 Flammability Test In Textile


Product Tags:

Bunched Cables vertical testing equipment

      

220V vertical testing equipment

      

IEC 60332-3 flammability test in textile

      
Quality 220V Bunched Cables Vertical Testing Equipment , IEC 60332-3 Flammability Test In Textile for sale

220V Bunched Cables Vertical Testing Equipment , IEC 60332-3 Flammability Test In Textile Images

Inquiry Cart 0
Send your message to this supplier
 
*From:
*To: DONGGUAN YUYANG INSTRUMENT CO., LTD
*Subject:
*Message:
Characters Remaining: (0/3000)
 
You May Like